pistol
Showing all 32 results
-
.32 Cal. Throating Cutter
$38.00Uniforms the chamber throats in the cylinder of a revolver for best accuracy.
Includes 7 pilots, cuts 32 caliber cylinders.
NOTE: No gauges are available for shipment with this reamer.
-
.38/.357 Special Throating Cutter
$38.00Uniforms the chamber throats in the cylinder of a revolver for best accuracy.
Includes 7 pilots, cuts .358
NOTE: No gauges are available for shipment with this reamer.
-
.40 / 10mm Throater
$30.00NOTE: No gauges are available for shipment with this reamer.
-
10mm Auto
$8.00 -
22 Winchester Magnum Cylinder
$34.00Pilot: Solid
-
25 ACP
$8.00 -
30 Herrett
$42.00Neck .333 Pilot: Floating
-
32 ACP
$8.00 -
40 Super (Triton)
$8.0040 Super
-
7.5mm FK Brno
$8.007.5 FK Brno
-
7.62×25 mm Tokarev
$8.00Same as 30 Mauser
-
7.65 Luger (30 Luger)
$8.00 -
Browning Hi-Power Pistols
$39.95DVD Gunsmithing course by AGI
-
Clear Plastic Telescoping Tube, long
$2.00Plastic tubes used to protect reamers and headspace gauges. Keeps tools from knocking into each other saving wear and tear.
This size works great for most reamers with a diameter of approximately .500″ or less x up-to 8″ length.
Overall length varies from 5″ to 8″.
-
Clear Plastic Telescoping Tube, long (10 pack)
$10.99Plastic tubes used to protect reamers and headspace gauges. Keeps tools from knocking into each other saving wear and tear.
This size works great for most reamers with a diameter of approximately .500″ or less x up-to 8″ length.
Overall length varies from 5″ to 8″. Package contains 10 complete tubes
-
Gunsmith Tools, Cutters & Gauges – A Primer
$12.95Shipping Now!
We spoke with leaders in the tool making industry about the things they spend most of their time and effort educating clients about. Contributions from Clymer, Forster, Manson, JGS, PTG, SAAMI and more are all included. There are books for machinists that teach this type of information, but until now there has never been a book for gunsmiths that explains the tools of the trade and how they should be utilized. The idea is simple, answer your questions before you order any tool.
Nomenclature is important, when you talk to a reamer maker, gunsmith or client you want to know the correct terms. This indicates to those you work with that you took the time the understand the tools. It will improve your ability the sell work to customers, buy or rent the right tools for the job. You will save untold hours and dollars, don’t learning at the “School of Hard Knocks”.
When you understand tools, they work better and last much longer. This both saves money and increases profits.
What is discussed?
All types or reamers specific to firearms work
Reamer Holders
Reamer Stops
Use of Reamers
Cutting Lube
Chip Welding and how to Stop it.
Misconceptions About Reamers
Chatter and its Cures
Shotgun Chamber Tools
Forcing Cone Reamers
Shotgun Chokes
Screw Choke Tooling
Measuring for Choke Tubes
Choke Lube
Defining Headspace
Choosing the Correct Gauge
Improved Chambers and Headspace
Headspace Gauge Interchange Chart
Charts for Tooling and bushings.
EBOOK NOW AVAILABLE TOO.
-
MGW Sight Pusher: 1911
$28.00Fits most any 1911 slide.
Designed to remove, install, and adjust the rear sight and not mar the handgun.
-
Plug Gauges for Forcing Cones in Revolver Barrels
$6.00By simply slipping the Plug Gauge into the barrel throat, it’s possible to tell at a glance when you are approaching the correct diameter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, (designed for chamfers cut with our tools – may not give a correct reading on guns with other degrees of chamfer). Each gauge is self-piloted, precision-ground, hardened and stepped to show minimum and maximum optimum diameters. 11° and 18° Gauge measures both chamfer angles.
Instruction for Plug Gauges.
-
Revolver Forcing Cone Tools 22 Rimfire
$30.00Includes the 11 degree forcing cone cutter, rod, t-handle.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 32 Caliber
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (5 degree)
$35.00Includes the 5 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 40 Caliber (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 41 Caliber (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 41 Caliber (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 44 and 45 Caliber (18 degree)
$35.00Includes the 18 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 44 Caliber (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 44 Caliber (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 45/460 Caliber (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 45/460 Caliber (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 9mm to 41 caliber (18 degree)
$35.00Includes the 18 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
