.705″ CounterBore, Remington 700 and Similar
$26.00Interchangeable pilot Counterbore for breech of 700 style barrels, cuts the recess for the bolt head in the barrel.
Chambering Tools
Showing all 16 results
-
-
1/4″ Tool Shank T-Handle
$12.50Brass T-handle extension for tools with 1/4″ Shank w/ set screw Common tools would be cylinder throaters, rim-fire chamber reamers, or for muzzle facing tools
-
60° Center Cutting Tool
$28.00Interchangeable pilot center cutting tool. Useful for creating a 60° seat for various centers for turning between centers.
-
Bolt Lug Lapping Tool
$15.00Bolt Lug lapping tool applies positive pressure to the bolt face to ensure a better more consistent lapped surface.
-
Chamber Reamer T-Handle with 3/8″ Adapter
$12.50T-Handle for Standard Chamber Reamers This T-handle is designed for hand operation of most standard chamber reamers and provides a secure, controlled grip during chambering and related gunsmithing work. It includes a removable adapter for standard 3/8″ square-drive chamber reamers and measures approximately 9 inches long. ✔ Standard Setup: T-Handle + 3/8″ Square-Drive Adapter ✔…
-
Chambering Gage (Badger Ordnance)
$30.00This is a fast and easy way to measure headspace on Remington Style barrels. That means barrels with a shoulder. Threaded area (tenon) diameter must be less than 1.060″. Length of the barrel tenon from the shoulder to the back of the headspace Gauge is limited to approximately 1.00″ or less. Instructions include with this…
-
JB Micrometer Reamer Stop
$35.00 - $40.00This device is added to your chamber reamer to control the depth of your cut. The micrometer adjustment allows you to fine tune your chamber depth in .001” increments. Produced in the United States here in Michigan by Bauduin Accuracy and Machine. Download JB Reamer Stop Instructions
-
-
Micrometer Reamer Stop
$35.00Precision, repeat-ability, and ease of use: these are the benefits of P. O. Ackley Micrometer Reamer Stop. Now you can do production runs with your Chamber Reamer, without having to index each workpiece axially. You’ll be assured of consistent headspace, chamber after chamber! To set up, insert your Chamber Reamer shank in the Reamer Holder…
-
Premium Pilot Set Rentals
$24.00 eaReamer Pilot Set Rental This reamer pilot set rental gives you a full range of precision-ground pilots for one caliber, so you can test-fit in the bore and use the pilot that fits best. Designed for removable-pilot chamber reamers, each set helps ensure proper alignment and a consistent, accurate chamber. $24 per set 6 Pilots…
-
Range Rods (Non-Tapered)
$14.00 -
Remington 700 Wrench (internal)
$30.00Action wrench for Remington 700 actions. This is the type that slides into the rails of the action. If your action has never been off the barrel from the factory, it may be too tight for this style of wrench. You turn it with the 7/8″ Closed end wrench included in the rental.
-
-
-
T-Handle for 1/4″ Shank Reamers
$12.50T-Handle for 1/4″ Shank Reamers This T-handle provides a simple, controlled way to operate small reamers and similar tooling by hand. It includes an adapter for use with standard 1/4″ shank tooling, including throating reamers, neck reamers, and rimfire reamers. ✔ Includes: T-Handle + 1/4″ Shank Adapter ✔ Compatible With: Throating Reamers, Neck Reamers, and…
-
Tap Wrench
$12.00Tap Wrench Rental Tap wrenches provide the handle and leverage needed to operate threading taps by hand. Customers do not need to select a tap wrench size. We will provide the appropriate tap wrench based on the threading tap included with your order. ✔ Size Selection: Matched to the Threading Tap in Your Order ✔…
