Shotgun Tools (rentals)
Specialty tools made just for working on Shotguns. Chamber tools are listed under reamer rentals. These tools are for any part of the shotgun outside of the chamber.
Showing all 30 results
-
#6 Hinge Pin Reamer
$20.00includes 1 hinge pin with rental
-
#7 Hinge Pin Reamer
$20.00includes 1 hinge pin with rental
-
10 GA. Dent Raiser
$60.00includes instructions
This is a wedge style dent raiser like Vickery described in his book.
-
10 Gauge Long Forcing Cone reamer (LFC)
$42.0010 Ga. LFC. Changes the forcing cone only.
-
12 – 10 Gauge Adjustable Choke Reamer
$20.00.718″ – .781″
Used to modify or remove fixed choke from barrel
-
12 GA X 3.5″ Magnum
$8.0012 Gauge, 3.5″ Magnum (smooth bore)
-
12 GA. Dent Raiser
$60.00includes instructions
This is a wedge style dent raiser like Vickery described in his book.
-
12 Gauge 55º Headspace Ring Reamer
$8.00includes 1 headspace ring
-
12 Gauge Chamber Depth Gage for 2.75” or 3”
$5.00 -
12 Gauge Rem-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Tru-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Tru-Choke Thinwall Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Win-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
16 – 12 Gauge Adjustable Choke Reamer
$20.00.656″ – .718″
Used to remove or modify fixed choke in barrel.
-
16 GA. Hydraulic Dent Raiser
$60.00includes instructions
-
20 – 10 Gauge muzzle facing tool
$25.00Order appropriate bushings.
At checkout just state the gauge barrel you are working with in the comment box.
-
20 – 16 Gauge Adjustable Choke Reamer
$20.00.593″ – .656″
-
20 GA. Hydraulic Dent Raiser
$60.00includes instructions
-
20 Gauge 55 degree Headspace Ring Reamer
$8.00You will have to fabricate your own ring.
-
20 Gauge Chamber Depth Gage for 2.75” or 3”
$5.00 -
20 Gauge Rem-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
20 Gauge Tru-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
20 Gauge Win-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
410 Winchester Invector Choke Tap & Reamer
$54.00Fixed chokes must be removed prior to use.
Rented as a set, reamer and tap.
If you have never used these tools click here before ordering.
-
410 X 3”
$8.00 -
Shell Latch Staker
$10.00Remington 870/1100 SHELL LATCH STAKER
This tool has the correct, factory designed, rectangular swaging point to displace plenty of metal and a built-in handle, for built in control.
-
Tap Wrench
$6.00for hand reaming or taps
-
Vent Rib Tool
$12.00Pulls out dented shotgun vent ribs in only minutes. Easy to attach, and quick to use. Brass bridge won’t mark top of rib; steel jaws self-adjust.
SPECS: Bridge; Machined brass 3″ (7.6cm) long, ¼” (6.3mm) thick. Jaws; Machined, hardened steel 1½” (3.8cm) long, ½” (12.7mm) wide at widest point.
-
Williams Scope Mount Drilling Fixture
$28.00Easily Drill and Tap your action for scope mounts.
fits receivers from .630” to 1.440”
-
Williams Shotgun Bead Drilling Fixture
$12.00Easily Drill and Tap for 6-48 or 3-56 beads
