Taps & Dies (rentals)
Showing all 38 results
-
.578″ x 28 die (45 pistol)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
.581″x40 Tap / Compensator / Muzzle Brakes
$15.00Compensator tap.
-
1/2″ x 28 Tap for AR / Muzzle Brakes
$15.00Muzzle brake tap, AR-15 Flash hiders and other common brakes.
-
1/2″ x 28 tpi Die (223 or 5.56)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (30/7.62)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (9mm)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand (LH) Die (5.45 guide)
$14.00Left hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 5.45×39 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand (LH) Die (7.62 guide)
$14.00Left hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 7.62 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand Tap
$12.00Popular with SKS and AK platforms. Used for Muzzle Brakes and Flash Hiders.
-
14 x 1 RH Die
$18.00Right hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 7.62 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
15mm x 1mm RH Die
$18.00Right hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool 7.62 Russian. -
5/8″ x 24 RH Die 223/5.56mm
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8″ x 24 RH Die 30 Caliber (.308″)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8″ x 24 RH Die 5.45mm
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8×24 Tap / Muzzle Brakes
$18.00Muzzle brake tap, common brakes.
-
7/8″x20 Die, Savage Model 25 Barrel Die
$15.00Savage Model 25 bolt actions with a barrel nut, at least the recent production guns are threaded 7/8×20.
1.175″ round die.
-
7/8″x20 Tap, Savage Model 25 Receiver Tap
$15.00Savage Model 25 bolt actions with a barrel nut, at least the recent production guns are threaded 7/8×20.
-
9/16″ x 24 tpi LH die for FN FAL
$18.00Left hand die, for FN FAL muzzle, uses 1.5″ round die stock
Includes a thread alignment tool (TAT). When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
9/16” x 18 Die
$18.00for specific muzzle brakes
-
9/16” x 18 Tap
$18.00for specific muzzle brakes
-
9/16” x 24 tpi, Die
$18.00for specific muzzle brakes, Right Hand. Ships with 7.62 bore alignment tool(TAT). When using a TAT make sure the tool never touches the end of the barrel, only the pilot. If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads.
-
Annular Cutter – Muzzle Diameter Reduction .500″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max, diameter down to 0.500″ x 1″ deep for use so you can thread the muzzle for a brake, 1/2×32 or 1/2×28 .
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
Annular Cutter – Muzzle Diameter Reduction .570″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max length, diameter down to 0.570″ x 1″ deep for 14x1LH as used on the SKS & AK pattern rifles or carbines. Threading dies rent separately.
Also works for 9/16-24 muzzle threading. Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
Annular Cutter – Muzzle Diameter Reduction .630″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max length, diameter down to 0.630″ x 1″ deep for use so you can thread the muzzle for a brake, 5/8 x 32 or 5/8 x 24 equally as well.
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
AR-15 Muzzle Thread Chase Die (1/2″x28)
$15.00Steel Die is used to chase or re-thread the mounting threads on AR-15 Flash Hider.
1/2″x28
-
AR-15 Upper Receiver Die
$12.00Steel Die is used to chase or re-thread the barrel mounting threads on AR-15 upper receiver.
1 1/4″x18
-
Die stock – 1.5″
$5.00for use with 1.5″ dies
-
Large Ring Barrel Die – 98 Mauser
$35.00Barrel thread die, large ring
-
Muzzle Thread Chase Die (5/8″x24)
$15.00Steel Die is used to chase or re-thread the mounting threads on muzzle brakes or suppressors.
5/8″x24
-
Receiver Tap – 98 Mauser Large Ring
$24.00Receiver Thread Tap (large ring)
-
Remington 700 Receiver Tap
$24.00Receiver Tap for Remington 700 actions.
SPECS: 1 1/16″x16 tpi
-
Savage Receiver Tap Standard Shank
$24.00Receiver Tap for standard Savage actions.
SPECS: 1.055″-20 tpi fits Savage 110/112.
-
Small Ring Mauser Barrel Die
$35.00barrel thread die (93, 95, 96)
-
Small Ring Mauser Receiver Tap
$22.00Tap for 93, 95, 96
-
Smith & Wesson K Frame Tap
$15.00.540” – 36 Thread
-
Smith & Wesson L Frame Tap
$15.00.562” – 36 Thread
-
Smith & Wesson N Frame Tap
$15.00.670” – 36 Thread
-
Tap Wrench
$6.00for hand reaming or taps
