Winchester
Showing all 64 results
-
6.5 / 270 WSM (.297) Match
$0.00Neck: .297 | Freebore: .173 | Lead Angle: 1.5º | Pilot: Bushing
-
6.5 / 270 WSM (.296) Match
$0.00Neck: .296 | Freebore: .188 | Lead Angle: 1.5º | Pilot: Bushing
-
284 Winchester Match
$0.00Neck: .322 | Freebore: .152 | Lead Angle: 1.5º | Pilot: Bushing
-
25/300 WSM, Match
$0.00Neck: .293 | Freebore: .180 | Lead Angle: 1.5º | Pilot: Bushing
-
243 Winchester Match
$0.00Neck: .271 | Freebore: .160 | Lead Angle: 1.5º | Pilot: Bushing
-
243 Winchester / Lapua, Match
$0.00Neck: .271 | Freebore: .125 | Pilot: Bushing
-
22 / 243 Winchester Match
$0.00Neck: .261 | Freebore: .135 | Lead Angle: 1.5º | Pilot: Floating
-
9 X 23 Winchester
$0.00 -
44-40 Winchester
$0.00for revolver cylinder
-
45 Winchester Magnum
$0.00 -
9mm Winchester Mag
$0.00 -
25-284 Winchester
$0.00 -
17 Winchester Super Magnum (WSM, rimfire)
$0.00Pilot Floating
-
22-30/30 Winchester
$0.00 -
22/30-30 Ackley Improved
$0.00 -
22-243 Rayhill Rocket
$0.00Pilot Floating
-
243 Winchester Ackley Improved
$0.00 -
25-35 Ackley Improved
$0.00 -
25/264 Winchester Magnum Ackley Improved
$0.00 -
6.5 / 30-30 Winchester
$0.00 -
260 Remington
$0.00 -
6.5-284 Winchester
$0.00 -
6.5-284 Shehane
$0.00Pilot Floating
Match chamber for 6.5/284 Winchester
-
6.5-284 Lapua
$0.00Neck .299 Freebore .188
Lead Angle 1.5º Pilot Floating -
6.5-284 Norma
$0.00Neck .301 Pilot Solid
-
6.5 / 270 WSM
$0.006.5/300 and 6.5/270 are interchangeable and use the same gauges.
-
6.5 / 300 WSM
$0.006.5-300 and 6.5-270 WSM are interchangeable and use the same gauges.
-
270 Winchester Ackley
$0.00 -
30/30 Winchester
$0.00 -
30/30 Ackley Improved
$0.00 -
348 Winchester Ackley Improved
$0.00Multiple versions of this cartridge are offered by reloading die makers.
-
35/348 Ackley Improved
$0.00 -
375/348 Ackley Improved
$0.00 -
44-40 Winchester Standard
$0.00Neck .443 Pilot Floating
-
225 Winchester
$0.00 -
22-243 Win. Ackley Improved
$0.0022-243 A.I.
-
38-40 WCF (B)
$0.00barrel reamer
-
350 Legend, Winchester
$0.00SAAMI finish reamer for Winchester’s new 350 Legend
-
40-65 WCF
$0.00.411″ Bullet
-
35/30-30 Winchester
$0.0030-30 Winchester necked up to .358″
-
50-95 Winchester Express
$0.00Slight bottleneck
Uses 50-70 or 50-110 Gauges
-
450/348 Ackley Improved
$0.00 -
300 Winchester Magnum Ackley Improved (AI)
$0.00 -
6mm/30-30 Ackley Improved
$0.00 -
45-75 Winchester
$0.00Pilot Solid
-
7mm-307 Winchester Ackley Improved
$0.00 -
30/348 Winchester Ackley Improved
$0.00Multiple versions of this cartridge are offered by reloading die makers.
-
308 Winchester (Zero Freebore)
$0.00This reamer does have a leade but no freebore. I works great for setting barrels back to shorten the throat. It is otherwise a standard 308 Winchester.
-
6.8 Western
$0.00Floating Pilot 6.8 Western
-
Heat Sink, Winchester 70
$6.00Heat sink for use in Winchester 70 Bolt.
-
Sale!
Broken Shell Extractor 308 Win. 7.62 NATO
$8.25
-
Bolt Lug Lapping Tool – Winchester Model 70
$15.00Applies spring tension to bolt face during lapping process.
1 inch x 16 threads per inch versions.
-
AR-10 Extension Gauges, 308 Winchester
$15.00These Gauges permit the checking of a barrel extension and barrel headspace without the need for a BCG or even a bolt. This set for AR-10 chambered in 308 Winchester.
-
Winchester 51 Piece Gunsmith Screwdriver set
$15.94-Gunsmith Screwdriver set
Perfect for the range bag or the bench.
-
Sale!
284 Winchester Forster Headspace Gauges
$32.95Headspace Gauges: For Sale
-
Sale!
30-06 Springfield Gauges
$32.95Also works with 22-06, 6mm-06, 25-06 Remington, 270 Winchester, 8mm-06, 338-06 and 35 Whelen
-
Sale!
308/243 Winchester Gauges
$32.95Description for the product.
Works with: 22-243, 243 Winchester, 7mm-08 Remington, 308 Winchester, 338 Federal and 358 Winchester
-
Sale!
300 Belted Magnum Gauges
$32.95Description for the product.
Works with belted magnums with a .535″ diameter belt.
257 Wby, 264 Win., 6.5 Rem. Mag., 270 Wby., 275 H&H, 7mm Rem. Mag.,
7mm Wby., 7×61, 300 H&H, 300 Win. Mag., 30-338 Win., 300 Wby., 308 Norma,
8mm Rem. Mag., 338 Win. Mag., 340 Wby., 350 Rem. Mag., 358 Norma,
375 H&H, 400 H&H, 416 Rem. Mag., 416 Taylor, 458 Winchester, 458 Lott.
-
Sale!
30-30 Rimmed Gauges
$32.95Description for the product.
Works with multiple cartridges:
219 Zipper, 219 Donaldson Wasp, 22/30-30, 25-35 WCF, 7-30 Waters,
7mm International, 30-30 WCF, 30 Harrett, 303 Savage, 307 Winchester,
32-40 WCF, 32 Winchester Special, 356 Winchester, 357 Herrett, 375 Winchester and 38-55 WCF
-
Sale!
Pillar Bedding Gunsmith Kit, Winchester 70
$49.95
Aluminum pillars machined to mate between the action and the trigger guard will eliminate any possible compression. In a sense what you are doing is putting the brunt of the load on rock solid pillars, then attaching your stock to these pillars. The single most important quality pillar bedded rifles must have is that all of its components are at rest, whether the trigger guard screws are loose or tight, I.E. stress free bedding.This easy to use kit allows the user to adjust the pillars to match the stock. You can assemble everything for bedding and know it is aligned for error proof bedding jobs.
Complete instructions included with the pillars and tools.
-
20 Gauge Win-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Win-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
.410 Winchester Invector Choke Tap & Reamer
$54.00Reamer & Tap
410 Winchester Invector Choke Tube tooling.
If you have never used these tools click here before ordering.
-
350 Legend Barrel blank
$159.9522″ long barrel blank for 350 Legend, 1-16 twist. Turned on centers, air gauged, stress relieved, and button rifled. Made of stainless steel.
We stock these blanks primarily to make Savage pre-fit barrels.
If you have us make this into a Savage barrel the end price will be the same as those listed for finished barrels. Blanks will always finish 1″ short than full length.
