Showing 81–132 of 132 results
T-Handle for Standard Chamber Reamers This T-handle is designed for hand operation of most standard chamber reamers and provides a secure, controlled grip during chambering and related gunsmithing work. It includes a removable adapter for standard 3/8″ square-drive chamber reamers and measures approximately 9 inches long. ✔ Standard Setup: T-Handle + 3/8″ Square-Drive Adapter ✔…
This is a fast and easy way to measure headspace on Remington Style barrels. That means barrels with a shoulder. Threaded area (tenon) diameter must be less than 1.060″. Length of the barrel tenon from the shoulder to the back of the headspace Gauge is limited to approximately 1.00″ or less. Instructions include with this…
Die Stock Rental Die stocks provide the handle and support needed to operate round threading dies by hand. Customers do not need to select a die stock size. We will provide the appropriate die stock based on the threading die included with your order. ✔ Size Selection: Matched to the Threading Die in Your Order…
Additional Pilot Rental Information You may request extra pilots at a $5 rental fee per pilot. Set the total quantity needed in the shopping cart. We do not stock every possible pilot diameter. Orders will be filled with all available pilots that match your request, and any unavailable pilots (bushings) will be refunded when the…
9/16×24 LH Includes a thread alignment tool (TAT). When using a TAT make sure the tool never touches the end of the barrel, only the pilot. If the TAT is allowed to touch the muzzle it is like the tools will be damaged or you will damage your new threa
This device is added to your chamber reamer to control the depth of your cut. The micrometer adjustment allows you to fine tune your chamber depth in .001” increments. Produced in the United States here in Michigan by Bauduin Accuracy and Machine. Download JB Reamer Stop Instructions
Barrel thread die, Martini / Enfield
Delrin insert for MGW revolver wrench frame. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns.
Fits most any 1911 slide. Designed to remove, install, and adjust the rear sight and not mar the handgun.
Precision, repeat-ability, and ease of use: these are the benefits of P. O. Ackley Micrometer Reamer Stop. Now you can do production runs with your Chamber Reamer, without having to index each workpiece axially. You’ll be assured of consistent headspace, chamber after chamber! To set up, insert your Chamber Reamer shank in the Reamer Holder…
Barrel Thread (Mosin Nagant) 0.980 – 16 TPI
Hand operated, with T-handle and pilot. Includes one cutter. If you want multiple cutters order them as add-on’s to this tool. Can be used in a Drill press or with a drill motor. Specify Caliber of pilot.
Steel Die is used to chase or re-thread the mounting threads on muzzle brakes or suppressors. 14×1 LH
Steel Die is used to chase or re-thread the mounting threads on muzzle brakes or suppressors. 5/8″x24
By simply slipping the Plug Gauge into the barrel throat, it’s possible to tell at a glance when you are approaching the correct diameter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, (designed for chamfers cut with our tools – may not give…
Hand operated, with T-handle and pilot. Includes one cutter. If you want multiple cutters order them as add-ons to this tool. Can be used in a Drill press or with a drill motor. 45° Cutter is for external chamfer only
Caliber Pilot Set Rental This caliber pilot set is designed for use with compatible chamber reamers to help ensure proper alignment and consistent, accurate chamber cutting. Each set includes a selection of precision-ground pilots chosen for the listed caliber or bore diameter. Pilot Sizes Vary by Set The number of pilots and available dimensions vary…
Barrel Thread Remington 700 1-1/16 x 16 TPI
Removes striker assembly in seconds for fast disassembly of all Remington bolts. Works with spring relaxed or cocked. Hook fits into the notch of the firing pin head. Rotating the lever pulls firing pin head back and locks it. Fast and easy.
Action wrench for Remington 700 actions. This is the type that slides into the rails of the action. If your action has never been off the barrel from the factory, it may be too tight for this style of wrench. You turn it with the 7/8″ Closed end wrench included in the rental.
Revolver Forcing Cone Kit Rental Rent a complete forcing cone tool setup and finish the job right. ✔ Includes: 1 Bushing + 1 Chamfer Cutter (your choice) ✔ Also Includes: T-Handle + Drive Rod + Centering Cone ✔ You Select: Pilot Caliber + Cutter Angle ✅ Choose your Pilot Caliber ✅ Choose your Cutter Angle…
Wrench Frame Only. Prevents springing the frame by using fitted inserts that exactly match the contours of the revolver frame and distribute the turning forces evenly over it. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns (inserts rented separately so you can order one or more this handle fits…
Interchangeable pilot crowning tool for calibers from 22 to 6mm.
Interchangeable pilot crowning tool for calibers from 25-284 (7mm).
Interchangeable pilot crowning tool for calibers from 30-458 caliber.
Interchangeable pilot crowning tool for calibers from 30-458 caliber. Medium Radius
Savage 110 / 112 Tap & Die Rental This tooling is intended for working with standard Savage 110 and 112 actions using the factory-style barrel thread. Customers may rent the tap or die as needed for cutting, restoring, or cleaning up compatible receiver and barrel threads during gunsmithing and repair work. ✔ Thread Specification: 1.055″-20…
Savage Large Shank Tap & Die Rental This tooling is intended for working with Savage large shank actions using the 1-1/8″ x 20 TPI barrel thread. Customers may rent the tap or die as needed for cutting, restoring, or cleaning up compatible receiver and barrel threads during gunsmithing and repair work. ✔ Thread Specification: 1-1/8″…
Savage Model 25 bolt actions with a barrel nut, at least the recent production guns are threaded 7/8″x20. 1.175″ round die.
Remington 870/1100 SHELL LATCH STAKER This tool has the correct, factory designed, rectangular swaging point to displace plenty of metal and a built-in handle, for built in control.
Masuer Small Ring (93, 95, 96)
.540” – 36 Thread
T-Handle for 1/4″ Shank Reamers This T-handle provides a simple, controlled way to operate small reamers and similar tooling by hand. It includes an adapter for use with standard 1/4″ shank tooling, including throating reamers, neck reamers, and rimfire reamers. ✔ Includes: T-Handle + 1/4″ Shank Adapter ✔ Compatible With: Throating Reamers, Neck Reamers, and…
Tap Wrench Rental Tap wrenches provide the handle and leverage needed to operate threading taps by hand. Customers do not need to select a tap wrench size. We will provide the appropriate tap wrench based on the threading tap included with your order. ✔ Size Selection: Matched to the Threading Tap in Your Order ✔…
Hold your bolt handle aligned properly to the bolt body while welding. Product may differ from image. Suggest ordering a heat sink at the same time to protect the threats and heat treat of your bolt during welding or brazing of the new bolt handle.
Pulls out dented shotgun vent ribs in only minutes. Easy to attach, and quick to use. Brass bridge won’t mark top of rib; steel jaws self-adjust. SPECS: Bridge; Machined brass 3″ (7.6cm) long, ¼” (6.3mm) thick. Jaws; Machined, hardened steel 1½” (3.8cm) long, ½” (12.7mm) wide at widest point.
Easily Drill and Tap your action for scope mounts. fits receivers from .630” to 1.440”
No products in the cart.
|
Uploaded
Failed
|
 |