thread
Showing all 23 results
-
.578″ x 28 die (45 pistol)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
.581″x40 Tap / Compensator / Muzzle Brakes
$15.00Compensator tap.
-
1/2″ x 28 tpi Die (223 or 5.56)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (30/7.62)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (9mm)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand (LH) Die (5.45 guide)
$14.00Left hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 5.45×39 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand (LH) Die (7.62 guide)
$14.00Left hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 7.62 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 RH Die
$18.00Right hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 7.62 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
15mm x 1mm RH Die
$18.00Right hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool 7.62 Russian. -
5/8″ x 24 RH Die 223/5.56mm
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8″ x 24 RH Die 30 Caliber (.308″)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8″ x 24 RH Die 5.45mm
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8×24 Tap / Muzzle Brakes
$18.00Muzzle brake tap, common brakes.
-
9/16” x 24 tpi, Die
$18.00for specific muzzle brakes, Right Hand. Ships with 7.62 bore alignment tool(TAT). When using a TAT make sure the tool never touches the end of the barrel, only the pilot. If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads.
-
Annular Cutter – Muzzle Diameter Reduction .500″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max, diameter down to 0.500″ x 1″ deep for use so you can thread the muzzle for a brake, 1/2×32 or 1/2×28 .
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
AR-15 Muzzle Thread Chase Die (1/2″x28)
$15.00Steel Die is used to chase or re-thread the mounting threads on AR-15 Flash Hider.
1/2″x28
-
Heat Sink, Mauser 98
$6.00Heat sink for use in 98 Mauser Bolt.
-
Heat Sink, Remington 700
$6.00Heat sink for use in Remington 700 Bolt.
-
Muzzle Thread Chase Die (5/8″x24)
$15.00Steel Die is used to chase or re-thread the mounting threads on muzzle brakes or suppressors.
5/8″x24
-
Muzzle Thread Protector
$0.00Knurled nut that threads on the muzzle of your barrel to protect the threads when your muzzle device is removed. Made in the USA of chromoly steel, black oxide finish.
-
AR, 1/2 x 28 x .700″ outside diameter, fits most AR-15 barrels and any barrel .700″ at the muzzle.
-
Glock, 1/2 x 28 x .641″ outside diameter, fits Glock 17 & 19, most 9mm barrels.
-
Ruger 10-22, 1/2 x 28 x .920″ outside diameter, fits 10-22 bull barrels.
-
Sporter, 1/2 x 28 x .625″ outside diameter, fits many light tapered barrels.
-
Varmint, 5/8 x 24 x .750″ outside diameter, fits AR-10 and any barrel with a .750″ muzzle.
-
-
Tap Wrench
$6.00for hand reaming or taps