set
Showing all 18 results
-
AR-15 Hammer/Trigger Pin Assembly Guide set
$15.95The KNS Precision, Inc. AR15 Hammer/Trigger Pin Assembly Guide is designed to allow the user to easily install and remove the AR15/M16 trigger and hammer pins. This guide includes 2 (two) guide pins and 1 (one) pusher. This is a must have for anyone who frequently installs or removes the trigger group in their AR15 or M16.
-
Bubble Level, SME (Weaver Dovetail)
$15.95The SME Bubble Bore level allows the shooter to check both the rifle bore and the reticle alignment at a glance. Constructed of aircraft grade aluminum.
Specification: SME Bubble Bore Level
Material: Aluminum
Notes:
- Attaches to any Weaver-style rail or base.
- Ambidextrous Mounting
- Assures bore alignment at a glance.
- White line on housing for quick reference.
- Hex wrench for mounting included
-
Forster – Trigger Guard Screw Sets
$7.49These simple tools allow you to keep the barreled action properly aligned in the stock during the inletting process. Without them it is very difficult to get a tight inlet.
- 98 Mauser
- Springfield 03, 03-A3 and Krag actions
- Remington 700, 721, 722
- Savage 110
- Winchester 70
- Sako
-
Forster Datum Dial
$89.95The Forster Datum Dial makes it possible for the handloader or gunsmith to use ordinary dial calipers to make normally difficult length measurements based on the case shoulder. By measuring cases to the datum line on the shoulder, the reloader can custom-fit the ammunition to a rifle’s chamber for the best possible fit for better accuracy potential and longer case life.
Gunsmiths can easily check the length of customers reloads verses the chamber.
This tool can also be used to double check headspace gauges if questions arise
Datum Dial in box, from Forster
Included are complete instructions, storage box, and a laminated chart with common datum diameters.
-
Forster Datum Dial Kit
$132.95The Forster Datum Dial Kit makes it possible for the handloader or gunsmith to use ordinary dial calipers to make normally difficult length measurements based on the case shoulder. By measuring cases to the datum line on the shoulder, the reloader can custom-fit the ammunition to a rifle’s chamber for the best possible fit for better accuracy potential and longer case life.
The gold “bullet dials” makes it easy to accurately determine bullet seating depth measured from the ogive when changing the seater die setting or when checking loaded rounds for consistency. It can also be used to check the bullets alone for variations that could hurt accuracy.
The Complete Kit includes the Body with Case Dial for checking cases and two Bullet/Cartridge Dials. The #1 dial fits 224, 243, 264, 284, and 308 calibers. The #2 dial fits 172, 204, 257, 277, and 338.
Gunsmiths can easily check the length of customers reloads verses the chamber. Seating depth verses throat, and uniformity of ammunition. All errors that can make problems hard to diagnose.
This kit can also be used to double check headspace gauges if questions arise.
Included are complete instructions, storage box, and a laminated chart with common datum diameters.
-
Forster Inletting Guide Screws (Stock Making)
$8.95These simple tools allow you to keep the barreled action properly aligned in the stock during the inletting process. Without them it is very difficult to get a tight inlet.
- 98 Mauser
- Springfield 03, 03-A3 and Krag actions
- Enfield 1914, 1917 and SMLE
- CZ 550 or 7.7 Jap Arisaka
- Remington 700, 721, 722
- Winchester 70 or 54
- Sako
-
Sale!
Forster Stock Makers Hand Screws (Stock Making)
$19.95These simple tools allow you to keep the barreled action properly aligned in the stock during final fitting.
Recommended by stockmakers, these Forster Stockmakers Hand Screws are used in the final accurate fitting of the stock to the action. These screws are precision made and hardened to make repeated trial fittings. Set of two.
To save time and to avoid damaged guard screws or a ruined stock, don’t attempt to inlet a stock without the proper stockmakers hand screws.
- 98 Mauser
- Remington 700, 721, 722
- Winchester 70 or 54
- Enfield P-14 or P-17
- Springfield or Krag
- Sako: Except, Model 75
- Ruger 77
- 7.7 Jap Arisaka
- 6.5 Jap
-
Scope Ring set, Medium, Silver
$7.95Medium, 1 inch scope rings. Matte Silver finish. Weaver style bases.
-
Scope Ring, High, Gloss
$7.95High 1 inch scope rings. Gloss Black finish. Weaver Style
-
Scope Ring, High, Matte
$7.49High 1 inch scope rings. Matte Black finish. Weaver style bases.