Muzzle Brake
Showing all 21 results
-
.578″ x 28 die (45 pistol)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (223 or 5.56)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (30/7.62)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (9mm)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand (LH) Die (5.45 guide)
$14.00Left hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 5.45×39 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 Left Hand (LH) Die (7.62 guide)
$14.00Left hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 7.62 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
14 x 1 RH Die
$18.00Right hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool (TAT) 7.62 Russian. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
15mm x 1mm RH Die
$18.00Right hand thread for metric Flash Hiders or Muzzle Brakes
Includes a thread alignment tool 7.62 Russian. -
5/8″ x 24 RH Die 223/5.56mm
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8″ x 24 RH Die 30 Caliber (.308″)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8″ x 24 RH Die 5.45mm
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) Specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
5/8×24 Tap / Muzzle Brakes
$18.00Muzzle brake tap, common brakes.
-
9/16” x 24 tpi, Die
$18.00for specific muzzle brakes, Right Hand. Ships with 7.62 bore alignment tool(TAT). When using a TAT make sure the tool never touches the end of the barrel, only the pilot. If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads.
-
Annular Cutter – Muzzle Diameter Reduction .500″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max, diameter down to 0.500″ x 1″ deep for use so you can thread the muzzle for a brake, 1/2×32 or 1/2×28 .
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
Annular Cutter – Muzzle Diameter Reduction .630″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max length, diameter down to 0.630″ x 1″ deep for use so you can thread the muzzle for a brake, 5/8 x 32 or 5/8 x 24 equally as well.
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
Thread Protector/Converter
$13.25GrovTec Thread Protector/Converter (adapter)
1/2″x28 thread – 5/8″x24 thead