Gunsmith
Showing all 21 results
-
Single Action, MGW Revolver Wrench Insert
$8.00Colt SAA (P frame) or the Ruger Blackhawk
Delrin insert for MGW revolver wrench frame. Interchangeable, split Delrin inserts allow slight adjustment to compensate for variations in individual guns.
-
Swivel Studs, custom ball design
$9.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. They come in the standard blue finish and can be color case hardened for a more custom finish. Price here is for one pair of these custom swivel studs.
These are 3/4″ wood screw style and will fit standard QD sling swivels.
-
Swivel Loops (1 pair)
$9.95One pair of GroveTec locking sling swivels (1″ loops). Studs sold seperately
-
Push Button Swivel, Installation Tool
$10.99Essential tool for installing Heavy Duty Push Button Swivel Bases, can be used with a hand wrench or 1/4″ socket drive. Greater ability to control seating depth.
Tool Only, Swivel sets sold seperately.
Black Oxide Finish
-
Winchester 70 style, bolt knob (Dakota)
$12.95Dakota cast bolt knobs for custom replacements.
-
Jarrow’s Inletting Black
$14.85JERROW’S INLETTING BLACK The standard among stock makers since 1963! Does not dry out or soak into the wood. Leaves a good clear mark, yet cleans up easily. A small amount goes a long way. Positively the best products on the market for precision hand fitting of gunstocks, knife handles, cabinet furniture; all precision inletting. Inlay / fit parts to wood with ease.
-
Action Block & Lower Vise Block Set (AR-15)
$15.00Protect Receiver From Damage When Clamping
Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish.
DO NOT USE ON BILLET UPPERS OR LEFT HAND UPPERS, OR DAMAGE TO THE UPPER CAN RESULT.
-
Swivel Stud & Swivel Set, custom ball design
$18.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. Included is a set of GroveTec locking sling swivels (1″ loops) Price here is for one pair of these custom swivel studs and one pair of swivel loops.
These are 3/4″ long wood screw style studs.
-
Jarrow’s Inletting Gold
$19.98JERROW’S INLETTING GOLD
Inletting Gold is for those very dark woods and ebony forends that Inletting Black just won’t work on. Also works well on fiberglass and composite stocks. The standard among stock makers since 1963! Does not dry out or soak into the wood. Leaves a good clear mark, yet cleans up easily. A small amount goes a long way. Positively the best products on the market for precision hand fitting of gunstocks, knife handles, cabinet furniture; all precision inletting. Inlay / fit parts to wood with ease.
-
Swivel Studs, custom ball design, Intallation Tool
$21.99The premium choice for installing our custom ball swivel studs. Constructed of heat-treated carbon steel, this tool will not damage stock finish. Hex base designed to fit any standard drill chuck or 1/4-inch nut driver.
(Stud not included)
-
Sale!
Understanding Headspace for Firearms (booklet)
$24.95$22.75
Understanding Headspace for Firearms will answer your every question about headspace.
This booklet is the second of many planned works that provide instruction in the correct and safe methods of gunsmithing. Specifically, this essay discusses Headspacing guns and ammunition.
A basic understanding of headspace and how it affects the proper operation of a firearm are necessary if you wish to call yourself a gunsmith. Otherwise all you will be able to do is change parts with the hope that somehow the problem will go away. This booklet contains all the information a gunsmith or reloader needs in order to understand and diagnose headspace in either the gun or the ammunition.
Fred Zeglin along with other well-known Gunsmiths has begun the task of creating this series of instructional manuals. Each book will focus on one narrow subject in Gunsmithing. Written with an audience in mind who want to know every detail of the how and why of gunsmithing.
Each book in the series will provide a highly detailed and Technical explanation of the subject at hand in a way that any gun lover will be able to understand, whether professional or hobbyist.
52 pages, soft bound. Printed in the U.S.A.
Back Cover of Understanding Headspace for Firearms.
“Understanding Headspace for Firearms.” Articles published here on Guns and Gunsmiths in the past on this topic have been some of the most highly read and commented on, so this book will be a treasure to many of you.” wrote Gary Howes of GunsAndGunsmiths.com when reviewing this book.
In the video below the Author tell you how to be sure your gauges are correct.
-
Chambering for Ackley Cartridge (booklet)
$24.95
Gunsmithing Student Handbook Series #1
This booklet is the first of many planned works that provide instruction in the correct and safe methods of gunsmithing. Specifically, this essay discusses Ackley Improved cartridges. In it, we will not teach you how to install and chamber a barrel, we handle that information in another title, “Chambering Rifle Barrels for Accuracy”. In this book we will in detail help you to understand the special details related to chambering for Ackley Improved designs, specifically we explain headspace for Ackley designs.
If you are not familiar with how headspace applies to firearms and ammunition you may want to consider another title we offer, “Understanding Headspace for Firearms”.
Fred Zeglin along with other well-known Gunsmiths has begun the task of creating a series of instructional manuals. Each book will focus on one narrow subject in Gunsmithing. Written with an audience in mind who want to know every detail of the how and why of gunsmithing.
Each book in the series will provide a highly detailed and Technical explanation of the subject at hand in a way that any gun lover will be able to understand, whether professional or hobbyist.
44 pages, soft bound. Printed in the U.S.A.
Back Cover of Chambering for Ackley Cartridges.
“The material and information inside will last you a lifetime. This is a PRACTICAL handbook.” Gary Howes, GunsAndGunsmiths.com
-
Heavy Duty Push Button Swivel Set
$25.95For 1-1/4″ Slings.
Constructed to extremely tight tolerances, heavy duty body, loop and stainless steel bases, this swivel pair provides rock-solid performance under the most demanding conditions. Pull tested up to 450 pounds of tension. The mounting studs are flush mounted in your stock.
Black Oxide Finish
-
Sale!
CERROSAFE® 1 lb ingot
$32.92$29.95Cerosafe, chamber casting alloy 1 pound ingot.
Purchase, not rental.
-
20 Gauge 55º Headspace Ring Reamer
$30.00You will have to fabricate your own ring.
-
Remington 700 Wrench (internal)
$30.00Action wrench for Remington 700 actions. This is the type that slides into the rails of the action. If your action has never been off the barrel from the factory, it may be too tight for this style of wrench.
You turn it with the 7/8″ Closed end wrench included in the rental.
-
Williams Scope Mount Screw Kit
$39.95-Gunsmith Screw Kit
-122 piece
-Assorted Metal ScrewsIncludes a 6-48 tap and #31 tap drill
& 8-40 tap and #28 tap drill
-
Chambering Rifles for Accuracy (book)
$39.99Third of many planned works that provide instruction in the correct and safe methods of gunsmithing.
Specifically, this essay discusses several methods that can be used to accurately chamber a rifle barrel. In Part I of the book Fred Zeglin teaches you all about accurate hunting rifles and discusses the variables that must be dealt with in order to create an accurate hunting rifle. In Part II Gordy Gritters, famed benchrest gunsmith, shares every secret he has learned over the last 30 years. Gordy finishes the book with a step by step process for bench rest barrel work.
If you are not familiar with how headspace applies to firearms and ammunition you may want to consider another title we offer, “Understanding Headspace for Firearms”.
Each book in the Gunsmith Student Handbook Series will focus on one narrow subject in Gunsmithing. Written with the audience in mind these books are for shooters who want to know every detail of the how and why of gunsmithing. Whether you plan to build guns or not, each book in the series will provide a highly detailed and technical explanation of the subject at hand, in a way that any gun lover will be able to understand. Professional or hobbyist will enjoy this read.
123 pages, soft bound. Printed in the U.S.A.
NOW Shipping
-
Mauser/Universal, bolt knob (Dakota) Quantity of 5 (five)
$57.50Dakota cast bolt knobs for custom replacements.
Quantity of 5 for a discounted price = $11.50 each bolt knob.
-
Swivel Studs, custom ball design (BULK)
$58.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. They come in the standard blue finish and can be color case hardened for a more custom finish. Price here is for 24 of these custom swivel studs in a bulk package.
These are 3/4″ wood screw style and will fit standard QD sling swivels.
-
16 GA. Hydraulic Dent Raiser
$60.00includes instructions
