Accuracy
Showing all 22 results
-
.303/ 7.7mm Precision Throater
$32.00throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
.338″ Precision Throater
$32.00.338″ throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
.44 Special Throating Cutter
$38.00Uniforms the chamber throats in the cylinder of a revolver for best accuracy.
Includes 7 pilots, cuts .431
NOTE: No gauges are available for shipment with this reamer.
-
.45 Cylinder Throating Cutter
$36.00Uniforms the chamber throats in the cylinder of a revolver for best accuracy.
Includes 7 pilots, cuts .452
NOTE: No gauges are available for shipment with this reamer.
-
‘Epoxy Sleeving’ and Lapping Bolt Lugs for Accuracy (DVD)
$49.94In this Course, Gordy Gritters, well known benchrest gunsmith and competitor, shares a previously proprietaty secret and extremely effective method of reducing bolt play in a rifle action to increase accuracy, sometimes astonishingly so!
He also goes into great detail showing a very effective method of lapping bolt lugs without wearing them at an angle like so often happens when using conventional methods.
These two techniques go hand-in-hand to correct issues that have a major impact on the accuracy of a rifle! Gordy’s clients rely on him to wring out all the accuracy possible from thier rifles, you and use the same methods to improve your guns.Another great instructional video. Return to Gordy’s expert instruction as often as you like to get every detail correct.
-
20 Caliber Precision Throater
$32.0020 Caliber throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
22 PPC
$8.00.252″ Neck
Pilot Floating -
22 Precision Throater
$32.0022 Center-fire throater allow for precise adjustments to the reamer so you can ream to any desired throat depth.
-
30 cal. (.308″) Precision Throater
$32.00.308″ Common American 30 caliber, throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
338 Precision Neck & Throat Kit
$32.00Precision adjustable Neck and Throat cutting tool.
Adapter can be ordered separate for use with the Manson Floating Reamer Holder or a tap handle.
-
6.5mm Precision Neck & Throat Kit
$32.00Precision adjustable Neck and Throat cutting tool.
Adapter can be ordered separate for use with the Manson Floating Reamer Holder or a tap handle.
-
6.5mm Precision Throater
$32.006.5mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
6mm Precision Throater
$32.006mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
7mm Precision Throater
$32.007mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
Bolt Fixture, LaBounty
$36.00Simple and rigid lathe fixture that holds most common rifle bolts in a four-jaw chuck for face and locking-lug truing (both front and rear surfaces) or opening up the face to accept magnum cartridges.
-
Chambering Rifles for Accuracy (book)
$39.95Third of many planned works that provide instruction in the correct and safe methods of gunsmithing.
Specifically, this essay discusses several methods that can be used to accurately chamber a rifle barrel. In Part I of the book Fred Zeglin teaches you all about accurate hunting rifles and discusses the variables that must be dealt with in order to create an accurate hunting rifle. In Part II Gordy Gritters, famed benchrest gunsmith, shares every secret he has learned over the last 30 years. Gordy finishes the book with a step by step process for bench rest barrel work.
If you are not familiar with how headspace applies to firearms and ammunition you may want to consider another title we offer, “Understanding Headspace for Firearms”.
Each book in the Gunsmith Student Handbook Series will focus on one narrow subject in Gunsmithing. Written with the audience in mind these books are for shooters who want to know every detail of the how and why of gunsmithing. Whether you plan to build guns or not, each book in the series will provide a highly detailed and technical explanation of the subject at hand, in a way that any gun lover will be able to understand. Professional or hobbyist will enjoy this read.
123 pages, soft bound. Printed in the U.S.A.
-
Evaluating Rifles for Accuracy Problems (DVD)
$49.94This is a great instructional video. You can return to it as often as you like to get every detail the way you want it.
In this intensive course, Gordy Gritters, well known benchrest gunsmith and competitor, thoroughly explains rifle accuracy, including the problems that cause poor accuracy, he shows you how to completely evaluate/measure/gauge every aspect of a factory or custom rifle for accuracy problems.
He shows how to “slug” a bore to evaluate internal barrel problems, and has some terrific borescope footage that clearly shows crooked/off-center chambers, smeared lands caused by dull chamber reamers, chamber and throat “reamer chatter”, throat erosion, and other accuracy robbing problems.
Gordy then goes into detail explaining some of the best procedures used to correct all the accuracy problems in the action, barrel, stock, bedding, trigger, and other components of a rifle, including the “Big Five” things that are absolutely essential to bring out the full accuracy potential in any rifle! This is the same information that Gordy uses to help his clients win matches.
Owning this kind of resource material is invaluable.
-
Forster Datum Dial Kit
$132.95The Forster Datum Dial Kit makes it possible for the handloader or gunsmith to use ordinary dial calipers to make normally difficult length measurements based on the case shoulder. By measuring cases to the datum line on the shoulder, the reloader can custom-fit the ammunition to a rifle’s chamber for the best possible fit for better accuracy potential and longer case life.
The gold “bullet dials” makes it easy to accurately determine bullet seating depth measured from the ogive when changing the seater die setting or when checking loaded rounds for consistency. It can also be used to check the bullets alone for variations that could hurt accuracy.
The Complete Kit includes the Body with Case Dial for checking cases and two Bullet/Cartridge Dials. The #1 dial fits 224, 243, 264, 284, and 308 calibers. The #2 dial fits 172, 204, 257, 277, and 338.
Gunsmiths can easily check the length of customers reloads verses the chamber. Seating depth verses throat, and uniformity of ammunition. All errors that can make problems hard to diagnose.
This kit can also be used to double check headspace gauges if questions arise.
Included are complete instructions, storage box, and a laminated chart with common datum diameters.
-
Manson Floating Reamer Holder
$30.001/2″ straight shank for use in all Lathes and Mills.
-
Micrometer Reamer Stop
$30.00Precision, repeat-ability, and ease of use: these are the benefits of P. O. Ackley Micrometer Reamer Stop. Now you can do production runs with your Chamber Reamer, without having to index each workpiece axially. You’ll be assured of consistent headspace, chamber after chamber!
To set up, insert your Chamber Reamer shank in the Reamer Holder and tighten the two set screws. Then insert the reamer holder into the Stop Cylinder assembly (micrometer threaded Stop Cylinder with .001″ Adjustment Nut, Lock Nut and optional Plug Nut). Make a rough cut in the chamber (leave about .025″ extra material). Now, with the reamer bottomed in the rough chamber, move the Stop Cylinder assembly into contact with the work piece and secure it to the Reamer Holder with three set screws.
You can now adjust the depth of the finish cut in increments of .001″, or even less. The Adjustment Nut is marked with 25 equidistant markings around the circumference, each of which corresponds to .001″ of axial adjustment. By backing off the Adjustment Nut and re-securing the Lock Nut, then repeating the cut, you can zero in on your specified headspace measurement. Adjustments of .0005″ can be made with confidence.
We recommend use with our floating reamer holders for best results, with this rental.
.437″ straight shank for use in all Lathes and Mills.
-
Premium Manson Muzzle Facing Kit
$50.00
Hand operated, with T-handle and pilot.Includes one cutter. If you want multiple cutters order them as add-ons to this tool. Can be used in a Drill press or with a drill motor.
-
Revolver Forcing Cone Tools 38/357/9mm (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
