9mm
Showing all 13 results
-
1/2″ x 28 tpi Die (9mm)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1911 Bushing Turning Tool
$18.00Put a bushing between the two halves and turn the outside diameter to match the slide.
Can be used in a lathe or Drill press to resize the bushing. No bushing included.
-
1911 Bushing Turning Tool with Compensator Extension
$24.00Put a bushing between the two halves and turn the outside diameter to match the slide. Can be used to fit comps directly to the slide.
Can be used in a lathe or Drill press to resize the bushing. No bushing or comp included.
-
9mm Largo
$8.00 -
9mm Luger
$8.00 -
9mm Winchester Mag
$8.00 -
9mm x 39 Russian
$42.00Unique gauges.
https://en.wikipedia.org/wiki/9%C3%9739mm
-
9mm x 57 Mauser
$0.00 -
9mm x 74R (9mm/9.3 x 74R)
$8.00358/9.3x74R = alternate name.
-
Revolver Forcing Cone Tools 38/357/9mm (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (5 degree)
$35.00Includes the 5 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 9mm to 41 caliber (18 degree)
$35.00Includes the 18 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
