wby
Showing all 19 results
-
22/240 Weatherby
$8.00Uses 240 Weatherby gauges
-
224 Weatherby
$8.00 -
270 Weatherby Magnum
$8.00 -
30-6.5 Weatherby RPM
$8.00The 6.5 WBY RPM is based on a lengthened version of the existing 284 Winchester. This is a wildcat 30 caliber based on the RPM case.
-
30/378 Weatherby Magnum
$8.00 -
300 Weatherby Match
$8.00Neck: .334 | Freebore: .235 | Lead Angle: 1.5º | Pilot: Bushing
-
338 Weatherby RPM
$8.00
-
375 Weatherby Magnum
$8.00 -
375 Weatherby Magnum – .200″ Freebore
$8.00Shorter than standard freebore.
-
416 Weatherby Short
$8.00 -
Sale!
460/378 Weatherby Belted Magnum Gauges
$32.95Description for the product.
Works with belted magnums with a .585″ diameter belt.
30-378 Weatherby. 338-378 Weatherby, 378 Weatherby, 460 Weatherby
-
6.5 / 300 Weatherby
$8.00 -
6.5 Weatherby RPM
$8.00The 6.5 WBY RPM is based on a lengthened version of the existing 284 Winchester. This cartridge has a rebated rim, making it compatible with standard 30-06 bolt faces and reloading equipment. However, the large body diameter, low body taper, and 35-degree shoulder mean that case capacity is greatly increased, leading to higher velocities, roughly 250 to 300 FPS faster than the 6.5/284 Winchester.
-
7mm / 300 Weatherby Match
$8.00Neck: .315 | Freebore: .150 | Lead Angle: 1.5º | Pilot: Floating
-
7mm Weatherby Magnum
$8.00 -
7mm x 6.5 Weatherby RPM
$8.00The 7mm x 6.5 WBY RPM is based on a lengthened version of the existing 284 Winchester. This cartridge has a rebated rim, making it compatible with standard 30-06 bolt faces and reloading equipment. However, the large body diameter, low body taper, and 35-degree shoulder mean that case capacity is greatly increased, leading to higher velocities, roughly 200 to 300 FPS faster than the 284 Winchester.
-
7mm/300 Weatherby
$8.00 -
Bolt Lug Lapping Tool – Howa 1500 or Weatherby Vangard
$15.00Works with either the Howa 1500 or the Wby Vangard.
-
Sale!
Pillar Bedding Gunsmith Kit, Howa 1500 or Weatherby Vanguard
$49.95Aluminum pillars machined to mate between the action and the trigger guard will eliminate any possible compression. In a sense what you are doing is putting the brunt of the load on rock solid pillars, then attaching your stock to these pillars. The single most important quality pillar bedded rifles must have is that all of its components are at rest, whether the trigger guard screws are loose or tight, I.E. stress free bedding.
This easy to use kit allows the user to adjust the pillars to match the stock. You can assemble everything for bedding and know it is aligned for error proof bedding jobs.
Complete instructions included with the pillars and tools.