reamer
Showing 1–100 of 115 results
-
.303/ 7.7mm Precision Throater
$32.00throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
.338″ Precision Throater
$32.00.338″ throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
.38/.357 Special Throating Cutter
$36.00Uniforms the chamber throats in the cylinder of a revolver for best accuracy.
Includes 7 pilots, cuts .358
NOTE: No gauges are available for shipment with this reamer.
-
.45 Cylinder Throating Cutter
$36.00Uniforms the chamber throats in the cylinder of a revolver for best accuracy.
Includes 7 pilots, cuts .452
NOTE: No gauges are available for shipment with this reamer.
-
#6 Hinge Pin Reamer
$20.00includes 1 hinge pin with rental
-
#7 Hinge Pin Reamer
$20.00includes 1 hinge pin with rental
-
10mm Auto
$8.00 -
12 – 10 Gauge Adjustable Choke Reamer
$20.00.718″ – .781″
Used to modify or remove fixed choke from barrel
-
12 Gauge Rem-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Tru-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Tru-Choke Thinwall Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
12 Gauge Win-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
16 – 12 Gauge Adjustable Choke Reamer
$20.00.656″ – .718″
Used to remove or modify fixed choke in barrel.
-
17 Hornet (Hornady)
$8.00 -
17 Mach IV
$8.00 -
17 Practical (17-223)
$8.00 -
17 Remington .194 neck
$8.0017 Remington with Ø0.194″ Neck
-
17 Remington Fireball
$8.00 -
17-222 Remington
$8.00Neck .199 Freebore .050
Lead Angle 1.5 degrees Pilot Solid -
17-250 (17/22-250)
$8.0017-250 Remington (17/22-250 Remington) Rifle Reamer Rental
-
19 Squirrel
$8.00 -
20 – 10 Gauge muzzle facing tool
$25.00Order appropriate bushings.
At checkout just state the gauge barrel you are working with in the comment box.
-
20 – 16 Gauge Adjustable Choke Reamer
$20.00.593″ – .656″
-
20 Caliber Precision Throater
$32.0020 Caliber throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
20 Gauge Rem-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
20 Gauge Tru-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
20 Gauge Win-Choke Tap & Reamer
$54.00Reamer, Tap and 5 bushings
Which Choke Tube Style Should I Thread My Barrel for?
Rem-Choke® & Win-Choke® style tubes are thicker and generally more available in local sporting goods stores.
Tru-Choke™ Standard tubes are thinner, and Tru-Choke™ Thinwall style tubes are thinner yet, so a wider range of barrels can be threaded to accept them. But they are less available. Check “Screw-in Choke Installation Requirements” to make sure your barrel will work with the selected style of choke tubes.
If you have never used these tools click here before ordering.
-
20 Nosler
$8.00Uses 22 Nosler Gauges
-
218 Bee
$42.00 -
218 Mashburn Bee
$8.00 -
219 Donaldson Rimless
$8.00Neck .251 Freebore .110
Lead Angle 1.5º Pilot Solid -
219 Donaldson Wasp
$8.00Neck .252 Freebore .110
Lead Angle 1.5º Pilot Solid -
219 Zipper
$8.00 -
22 BR Norma/Lapua
$8.0022 BR for Norma / Lapua brass.
-
22 Cheetah MK I
$8.00 -
22 Cheetah MK II
$8.00 -
22 Creedmoor
$8.0022 Creedmoor, uses same gauges as 6.5 or 6mm Creedmoor
-
22 Dasher
$8.00Pilot Solid
-
22 Grendel
$8.00Use 6.5 Grendel gauges
-
22 Hornet
$8.00 -
22 Lilja Match
$8.0022 Lilja Match Finish Reamer
-
22 PPC USA
$8.00Neck .252 Freebore .070
Pilot Floating -
22 Precision Throater
$32.0022 Center-fire throater allow for precise adjustments to the reamer so you can ream to any desired throat depth.
-
22 Savage Hi Power
$42.00Pilot Floating
-
22-243 Middlestead
$8.00 -
22-243 Win. Ackley Improved
$8.0022-243 A.I.
-
22-243 Winchester
$8.00Pilot Floating
-
22-250 Remington
$8.00 -
22-284 Winchester
$8.00 -
220 Swift
$8.00 -
222 Remington .250 neck
$8.00Neck .250 Freebore 0
Lead Angle 0º Pilot Floating -
222 Remington .251 neck
$8.00Neck .251 Freebore 0
Lead Angle 0º Pilot Floating -
222 Remington Magnum
$8.00 -
223 WSSM
$8.00 -
223 Wylde
$8.00Neck .256 Freebore .060
Lead Angle 1.5º Pilot Solid -
223-300 WSM
$8.00 -
224 Vais
$38.00NOTE: No gauges are available for shipment with this reamer.
-
225 Comet
$8.00Neck .257 Pilot Solid
-
22×47 Lapua
$8.00Pilot Floating
-
25 ACP
$8.00 -
25 Cal. Neck Only
$30.00These reamers cut only the neck for the given caliber. Reamers are designed to provide a standard chamber for the specified caliber, that means the neck will normally be about .004” over the diameter of the loaded round. This specific reamer is solid pilot.
NOTE: No gauges are available for shipment with this reamer.
-
25-06 Niedner
$8.00Also known as the 25 Niedner
-
25/06 Remington
$42.00 -
30 cal. (.308″) Precision Throater
$32.00.308″ Common American 30 caliber, throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
30 Caliber Neck Only Reamer
$30.00This reamer is neck only for 30 caliber. Designed to modify a neck diameter to standard 30 caliber neck dimensions (nominal .338″) Can also be used to lengthen a neck cut.
NOTE: No gauges are available for shipment with this reamer.
-
308 Winchester / Lapua Match
$8.00Neck: .341″ | Freebore: .115″ | Pilot: Bushing
-
30R Blaser
$8.00 -
338 Caliber Neck Only Reamer
$30.00This reamer is neck only for 338 caliber. Designed to modify a neck diameter to standard 338 caliber neck dimensions (nominal .372″) Can also be used to lengthen a neck cut.
NOTE: No gauges are available for shipment with this reamer.
-
35 Ackley Magnum
$42.00Pilot Floating
-
375 Whelen Ackley Improved
$8.00 -
410 GA Long Forcing Cone
$42.00 -
5.45×39
$8.00 -
50 BMG Match
$18.00Neck: .559 | Freebore: 0 | Lead Angle: 0º | Pilot: Bushing
No Throat Reamer. Suggest you rent a 50 caliber throating reamer with this too.
-
50-70 Government
$8.00 -
6.5mm Precision Neck & Throat Kit
$32.00Precision adjustable Neck and Throat cutting tool.
Adapter can be ordered separate for use with the Manson Floating Reamer Holder or a tap handle.
-
6.5mm Precision Throater
$32.006.5mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
600 Nitro Express
$16.00 -
6mm Competition Match
$8.00ptg print #40368, revision B
-
6mm Dasher
$42.00 -
6mm Dasher Norma
$42.00Pilot Floating (For Norma Brass)
-
6mm Precision Throater
$32.006mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
6mm/22 Nosler
$42.00Pilot Floating
NOT 24 Nosler
-
7.65 Luger (30 Luger)
$8.00 -
7mm Neck only
$30.00This reamer is neck only for 7mm caliber. Reamers are designed to provide a standard chamber for the specified caliber, that means the neck will normally be about .004” over the diameter of the loaded round. .3165″ diameter neck for chamber.
NOTE: No gauges are available for shipment with this reamer.
-
7mm Precision Throater
$32.007mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
Adapter for Precision Neck & Throat or Precision Throat Reamers
$5.00Threads onto the reamer to covert it to standard 7/16″ round shank with 3/8″ square drive flats.
-
Clear Plastic Telescoping Tube, long
$2.00Plastic tubes used to protect reamers and headspace gauges. Keeps tools from knocking into each other saving wear and tear.
This size works great for most reamers with a diameter of approximately .500″ or less x up-to 8″ length.
Overall length varies from 5″ to 8″.
-
Clear Plastic Telescoping Tube, long (10 pack)
$10.99Plastic tubes used to protect reamers and headspace gauges. Keeps tools from knocking into each other saving wear and tear.
This size works great for most reamers with a diameter of approximately .500″ or less x up-to 8″ length.
Overall length varies from 5″ to 8″. Package contains 10 complete tubes
-
Cylinder/Brake Hone
$19.99Shotgun Choke and Forcing Cone Hone *Extra Hone stones, 240 grit.
Can also be used on chokes.
-
Lazzeroni 6.17 Spitfire
$8.00 -
Lazzeroni 7.21 FIREHAWK
$8.00Floating Pilot, 7mm/284 caliber.
-
Lazzeroni, 7.21 Tomahawk
$8.00Floating Pilot, 7mm/284 caliber.
-
Manson Floating Reamer Holder
$30.001/2″ straight shank for use in all Lathes and Mills.
-
Micrometer Reamer Stop
$30.00Precision, repeat-ability, and ease of use: these are the benefits of P. O. Ackley Micrometer Reamer Stop. Now you can do production runs with your Chamber Reamer, without having to index each workpiece axially. You’ll be assured of consistent headspace, chamber after chamber!
To set up, insert your Chamber Reamer shank in the Reamer Holder and tighten the two set screws. Then insert the reamer holder into the Stop Cylinder assembly (micrometer threaded Stop Cylinder with .001″ Adjustment Nut, Lock Nut and optional Plug Nut). Make a rough cut in the chamber (leave about .025″ extra material). Now, with the reamer bottomed in the rough chamber, move the Stop Cylinder assembly into contact with the work piece and secure it to the Reamer Holder with three set screws.
You can now adjust the depth of the finish cut in increments of .001″, or even less. The Adjustment Nut is marked with 25 equidistant markings around the circumference, each of which corresponds to .001″ of axial adjustment. By backing off the Adjustment Nut and re-securing the Lock Nut, then repeating the cut, you can zero in on your specified headspace measurement. Adjustments of .0005″ can be made with confidence.
We recommend use with our floating reamer holders for best results, with this rental.
.437″ straight shank for use in all Lathes and Mills.
-
Plug Gauges for Forcing Cones in Revolver Barrels
$6.00By simply slipping the Plug Gauge into the barrel throat, it’s possible to tell at a glance when you are approaching the correct diameter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, (designed for chamfers cut with our tools – may not give a correct reading on guns with other degrees of chamfer). Each gauge is self-piloted, precision-ground, hardened and stepped to show minimum and maximum optimum diameters. 11° and 18° Gauge measures both chamfer angles.
Instruction for Plug Gauges.
-
Revolver Forcing Cone Tools 22 Rimfire
$30.00Includes the 11 degree forcing cone cutter, rod, t-handle.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 22 RimFire Caliber
Includes the 11 degree forcing cone cutter, rod, t-handle.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 32 Caliber
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (11 degree)
$35.00Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed.
Add a chamfer plug gauge if you so desire.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
-
Revolver Forcing Cone Tools 38/357/9mm (22 degree)
$35.00Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets.
Add an 11 to 18 degree chamfer plug gauge if you so desire, they work on the diameter of the forcing cone so would work for this cutter as well.
If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
