Precision
Showing all 23 results
-
.303/ 7.7mm Precision Throater
$32.00throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
.338″ Precision Throater
$32.00.338″ throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
‘Epoxy Sleeving’ and Lapping Bolt Lugs for Accuracy (DVD)
$49.94In this Course, Gordy Gritters, well known benchrest gunsmith and competitor, shares a previously proprietaty secret and extremely effective method of reducing bolt play in a rifle action to increase accuracy, sometimes astonishingly so!
He also goes into great detail showing a very effective method of lapping bolt lugs without wearing them at an angle like so often happens when using conventional methods.
These two techniques go hand-in-hand to correct issues that have a major impact on the accuracy of a rifle! Gordy’s clients rely on him to wring out all the accuracy possible from thier rifles, you and use the same methods to improve your guns.Another great instructional video. Return to Gordy’s expert instruction as often as you like to get every detail correct.
-
20 Caliber Precision Throater
$32.0020 Caliber throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
22 Precision Throater
$32.0022 Center-fire throater allow for precise adjustments to the reamer so you can ream to any desired throat depth.
-
30 cal. (.308″) Precision Throater
$32.00.308″ Common American 30 caliber, throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
338 Precision Neck & Throat Kit
$32.00Precision adjustable Neck and Throat cutting tool.
Adapter can be ordered separate for use with the Manson Floating Reamer Holder or a tap handle.
-
6.5 PRC (Hornady)
$42.006.5 PRC (Hornady)
-
6.5 PRC AW2 Spec
$42.006.5 PRC AW2 Spec
-
6.5 PRC G.A. Precision
$42.006.5 PRC, G.A. Precision version
Freebore about .130″
No-Turn Neck
-
6.5mm Precision Neck & Throat Kit
$32.00Precision adjustable Neck and Throat cutting tool.
Adapter can be ordered separate for use with the Manson Floating Reamer Holder or a tap handle.
-
6.5mm Precision Throater
$32.006.5mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
6mm Precision Throater
$32.006mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
7mm PRC
$42.00 -
7mm Precision Throater
$32.007mm throater allows for precise adjustments to the reamer so you can ream to any desired throat depth.
-
AR-15 Hammer/Trigger Pin Assembly Guide set
$15.95The KNS Precision, Inc. AR15 Hammer/Trigger Pin Assembly Guide is designed to allow the user to easily install and remove the AR15/M16 trigger and hammer pins. This guide includes 2 (two) guide pins and 1 (one) pusher. This is a must have for anyone who frequently installs or removes the trigger group in their AR15 or M16.
-
Chambering Gage (Badger Ordnance)
$30.00This is a fast and easy way to measure headspace on Remington Style barrels. That means barrels with a shoulder. Threaded area (tenon) diameter must be less than 1.060″. Length of the barrel tenon from the shoulder to the back of the headspace Gauge is limited to approximately 1.00″ or less. Instructions include with this rental.
-
Evaluating Rifles for Accuracy Problems (DVD)
$49.94This is a great instructional video. You can return to it as often as you like to get every detail the way you want it.
In this intensive course, Gordy Gritters, well known benchrest gunsmith and competitor, thoroughly explains rifle accuracy, including the problems that cause poor accuracy, he shows you how to completely evaluate/measure/gauge every aspect of a factory or custom rifle for accuracy problems.
He shows how to “slug” a bore to evaluate internal barrel problems, and has some terrific borescope footage that clearly shows crooked/off-center chambers, smeared lands caused by dull chamber reamers, chamber and throat “reamer chatter”, throat erosion, and other accuracy robbing problems.
Gordy then goes into detail explaining some of the best procedures used to correct all the accuracy problems in the action, barrel, stock, bedding, trigger, and other components of a rifle, including the “Big Five” things that are absolutely essential to bring out the full accuracy potential in any rifle! This is the same information that Gordy uses to help his clients win matches.
Owning this kind of resource material is invaluable.
-
Jarrow’s Inletting Black
$14.85JERROW’S INLETTING BLACK The standard among stock makers since 1963! Does not dry out or soak into the wood. Leaves a good clear mark, yet cleans up easily. A small amount goes a long way. Positively the best products on the market for precision hand fitting of gunstocks, knife handles, cabinet furniture; all precision inletting. Inlay / fit parts to wood with ease.
-
Jarrow’s Inletting Gold
$19.95JERROW’S INLETTING GOLD
Inletting Gold is for those very dark woods and ebony forends that Inletting Black just won’t work on. Also works well on fiberglass and composite stocks. The standard among stock makers since 1963! Does not dry out or soak into the wood. Leaves a good clear mark, yet cleans up easily. A small amount goes a long way. Positively the best products on the market for precision hand fitting of gunstocks, knife handles, cabinet furniture; all precision inletting. Inlay / fit parts to wood with ease.
-
Swivel Stud & Swivel Set, custom ball design
$18.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. Included is a set of GroveTec locking sling swivels (1″ loops) Price here is for one pair of these custom swivel studs and one pair of swivel loops.
These are 3/4″ long wood screw style studs.
-
Swivel Studs, custom ball design
$9.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. They come in the standard blue finish and can be color case hardened for a more custom finish. Price here is for one pair of these custom swivel studs.
These are 3/4″ wood screw style and will fit standard QD sling swivels.
-
Swivel Studs, custom ball design (BULK)
$58.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. They come in the standard blue finish and can be color case hardened for a more custom finish. Price here is for 24 of these custom swivel studs in a bulk package.
These are 3/4″ wood screw style and will fit standard QD sling swivels.
