Muzzle
Showing all 21 results
-
.578″ x 28 die (45 pistol)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
.581″x40 Tap / Compensator / Muzzle Brakes
$15.00Compensator tap.
-
1/2″ x 28 tpi Die (223 or 5.56)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (30/7.62)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
1/2″ x 28 tpi Die (9mm)
$18.00for specific muzzle brakes.
Includes a thread alignment tool (TAT) specify caliber at check out. When using a TAT make sure the tool never touches the end of the barrel, only the pilot.
If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads. -
17 Caliber Muzzle Facing Tools
$30.00Hand operated, with T-handle and pilot.
Includes one cutter. If you want multiple cutters order them as add-on’s to this tool. Can be used in a Drill press or with a drill motor.
Specify Caliber of pilot.
17 Caliber Muzzle Tools – facing cutter, one Handle, and choose from 4 rifle muzzle pilots in .165″, .166″, .167″ and .173″ diameters. These diameters cover Rimfire, Centerfire & Airgun
You can add a 79° (11°) muzzle crowning cutter or 45° chamfer cutter at $5 each
-
5/8×24 Tap / Muzzle Brakes
$18.00Muzzle brake tap, common brakes.
-
9/16” x 24 tpi, Die
$18.00for specific muzzle brakes, Right Hand. Ships with 7.62 bore alignment tool(TAT). When using a TAT make sure the tool never touches the end of the barrel, only the pilot. If the TAT is allowed to touch the muzzle it is likely the tools will be damaged or you will damage your new threads.
-
Annular Cutter – Muzzle Diameter Reduction .500″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max, diameter down to 0.500″ x 1″ deep for use so you can thread the muzzle for a brake, 1/2×32 or 1/2×28 .
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
Annular Cutter – Muzzle Diameter Reduction .570″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max length, diameter down to 0.570″ x 1″ deep for 14x1LH as used on the SKS & AK pattern rifles or carbines. Threading dies rent separately.
Also works for 9/16-24 muzzle threading. Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
Annular Cutter – Muzzle Diameter Reduction .630″ x 1″
$42.00Annular Cutter* for reduction of muzzle diameter. Cuts 0.900″ max length, diameter down to 0.630″ x 1″ deep for use so you can thread the muzzle for a brake, 5/8 x 32 or 5/8 x 24 equally as well.
Threading dies rent separately.
*Low RPM (250 RPM is Maximum) and lots of Lube, unless you want to replace the tool.
-
AR-15 Muzzle Thread Chase Die (1/2″x28)
$15.00Steel Die is used to chase or re-thread the mounting threads on AR-15 Flash Hider.
1/2″x28
-
Muzzle Facing Tools
$28.00Hand operated, with T-handle and pilot.
Includes one cutter. If you want multiple cutters order them as add-on’s to this tool. Can be used in a Drill press or with a drill motor.
Specify Caliber of pilot.
-
Muzzle Thread Chase Die (5/8″x24)
$15.00Steel Die is used to chase or re-thread the mounting threads on muzzle brakes or suppressors.
5/8″x24
-
Muzzle Thread Protector
$0.00Knurled nut that threads on the muzzle of your barrel to protect the threads when your muzzle device is removed. Made in the USA of chromoly steel, black oxide finish.
-
AR, 1/2 x 28 x .700″ outside diameter, fits most AR-15 barrels and any barrel .700″ at the muzzle.
-
Glock, 1/2 x 28 x .641″ outside diameter, fits Glock 17 & 19, most 9mm barrels.
-
Ruger 10-22, 1/2 x 28 x .920″ outside diameter, fits 10-22 bull barrels.
-
Sporter, 1/2 x 28 x .625″ outside diameter, fits many light tapered barrels.
-
Varmint, 5/8 x 24 x .750″ outside diameter, fits AR-10 and any barrel with a .750″ muzzle.
-
-
Thread Protector/Converter
$13.25GrovTec Thread Protector/Converter (adapter)
1/2″x28 thread – 5/8″x24 thead