AR-15
Showing all 16 results
-
1/2″ x 28 Tap for AR / Muzzle Brakes
$15.00Muzzle brake tap, AR-15 Flash hiders and other common brakes.
-
300 Ham’R
$42.00Starline produced 300 HAM’R cases are available, but cases can be made from common and available 5.56/.223 cases.
Any AR15 platform rifle can be converted to 300 HAM’R with a simple barrel change and the use of 300 Blackout magazines. 300 HAM’R has 18% more retained velocity, 40% more energy and a 56% flatter trajectory than the 300 BLACKOUT at 200 yards! 300 HAM’R was designed around a slow twist, 1-15 twist match grade barrel optimized for accuracy with 110gr to 135gr bullets. The 300 HAM’R has a 300 FPS velocity and 400 FP energy advantage over the 300 BLACKOUT at the muzzle.
The 300 HAM’R is capable of duplicating the proven ballistics of the legendary .30-30 Winchester from a comparable barrel length. Only 25-28 grains of powder compared to the 34-38 grains the .30-30 requires, so recoil is reduced.
-
300 Whisper
$42.00 -
338 Spectre
$42.00 -
350 Legend, Forster Headspace Gauges
$35.99Headspace Gauges: For Sale
-
5.56×45 NATO
$8.00Pilot Floating
Uses 223 Rem. Gauges or 5.56 Gauges.
-
Action Block & Lower Vise Block Set (AR-15)
$15.00Protect Receiver From Damage When Clamping
Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish.
DO NOT USE ON BILLET UPPERS OR LEFT HAND UPPERS, OR DAMAGE TO THE UPPER CAN RESULT.
-
AR-15 Barrel Extension Wrench & guide
$15.00Wrench for installing barrel extensions on a barrel, comes with extension guide to align properly.
-
AR-15 Barrel Wrench / Multi-tool
$10.00Multi-Tool you will need when assembling your AR.
-
AR-15 Buffer Tube Tap (Rental)
$20.00Steel Tap is used to chase or re-thread the mounting threads for AR-15 buffer tubes.
1 3/16 – 16 TPI
NO AVAILABLE TAP HANDLE
-
AR-15 Extension Gauges (5.56)
$20.00These Gauges permit the checking of a barrel extension and barrel headspace without the need for a BCG or even a bolt. This set for 5.56 Nato or 223 Remington.
-
AR-15 Front Sling Swivel Staking Tool
$15.00Make that swivel secure. Stake it properly with this rental tool.
-
AR-15 Hammer/Trigger Pin Assembly Guide set
$15.95The KNS Precision, Inc. AR15 Hammer/Trigger Pin Assembly Guide is designed to allow the user to easily install and remove the AR15/M16 trigger and hammer pins. This guide includes 2 (two) guide pins and 1 (one) pusher. This is a must have for anyone who frequently installs or removes the trigger group in their AR15 or M16.
-
AR-15 Trigger Test Fixture
$20.00This tool is designed to aid in trigger work for your AR-15. The fixture uses .154″ pins. It allows you to fully assemble your trigger parts so that you can see every part the the trigger mechanism (Fire Control) in proper relationship. Great for Trigger Jobs, Learning how the trigger and related parts function, and gunsmithing. Includes both stops for the safety to allow full function. Kit comes as pictured, just add your parts. This is a rental. If you want to buy one email a request.
-
AR-15 Upper Receiver Die
$15.00Steel Die is used to chase or re-thread the barrel mounting threads on AR-15 upper receiver.
1 1/4″x18
-
Broken Shell Extractor 223/5.56
$6.95
