700
Showing all 11 results
-
.705″ CounterBore #1, Remington 700 and similar
$26.00Interchangeable pilot Counterbore for breech of 700 style barrels, cuts the recess for the bolt head in the barrel. Work with calibers between 22-243.
Specify pilot.
-
.705″ CounterBore, Remington 700 and similar #2
$26.00Interchangeable pilot Counterbore for breech of 700 style barrels, cuts the recess for the bolt head in the barrel. Work with calibers between 25-29.
Specify pilot.
-
.705″ CounterBore, Remington 700 and similar #3
$26.00Interchangeable pilot Counterbore for breech of 700 style barrels, cuts the recess for the bolt head in the barrel. Work with calibers between 30-49.
Specify pilot.
-
.705″ CounterBore, Remington 700 and similar #4
$26.00Interchangeable pilot Counterbore for breech of 700 style barrels, cuts the recess for the bolt head in the barrel. Work with calibers between 50 & 62.
Specify pilot.
-
Bedding Pillars, Rem 700
$24.95Remington 700 adjustable pillars. Buy stand alone or use to refill the Gunsmith’s pillar bedding kit.
-
Heat Sink, Remington 700
$6.00Heat sink for use in Remington 700 Bolt.
-
Pillar Drilling Jig by Score High Gunsmithing
$100.00This stock drilling jig is by far the best method for drilling a Remington 700 stock to accommodate our adjustable pillars or pillars made by any one. Each kit comes with a specially modified drill that will not split or damage the stock. The drill bushing bar is the same diameter as a Remington action and is rigidly attached to the stock. It is actually a superior method to drill a stock than a drill press or even a milling machine. We only stock the 5/8″ drill and bushings.
No more damaged finish trying to remove the factory trigger guard from a bedded stock. No more trying to clean epoxy and mold release from the rough surface of a factory trigger guard. Our bedding blocks leave the bedded surface of your stock looking as if it just came out of a precision mold. Because these Bedding Blocks are made extra tall you never have to worry about the factory trigger guard being slightly below the stock’s finished surface and what to do with the epoxy that runs over the top.
Instructions included in the rental.
Complete Kit for all Remington 700 Variations.
-
Remington 700 Pillar Bedding Gunsmith Kit
$49.95
Remington 700 Gunsmith’s pillar bedding kit comes with a set of adjustable pillars and installation tools for a perfect job every time. Full instructions included. refill pillar kits available separately. Just add your favorite bedding compound. -
Remington 700 Receiver Tap
$24.00Receiver Tap for Remington 700 actions.
SPECS: 1 1/16″x16 tpi
-
Remington 700 Wrench (internal)
$30.00Action wrench for Remington 700 actions. This is the type that slides into the rails of the action. If your action has never been off the barrel from the factory, it may be too tight for this style of wrench.
You turn it with the 7/8″ Closed end wrench included in the rental.
-
Remington style, bolt knob (Dakota)
$18.95Dakota cast bolt knobs for custom replacements. Limited Quantities on hand. Future availability is in question.
