Cuts beautiful chatter-free chamfer to eliminate spitting at the barrel cylinder gap and improves accuracy.
We offer the kit with the 11° Chamfer Cutter, Calibers available are from 22 up to 45. We stock 90° Facing Cutters in several diameters specify the diameter of your barrel breech. Kits for 18 degree and 5 degree are available for some calibers.
Specify caliber so the Pilots are appropriate.
All kits include Handle, Tool Extension Rod, Centering Guide, Breaker Bar, and 3⁄32″ Allen Wrench . . . all in the fitted, plastic, bench box. Actual Kit my vary from Photo.
Showing all 6 results
By simply slipping the Plug Gauge into the barrel throat, it’s possible to tell at a glance when you are approaching the correct diameter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, (designed for chamfers cut with our tools – may not give…
Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed. Add a chamfer plug gauge if you so desire. If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
Includes the 18 degree forcing cone cutter, rod, t-handle and bushing where needed. Add a chamfer plug gauge if you so desire. If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
Includes the 22 degree forcing cone cutter, rod, t-handle and bushing where needed. This cutter was made by PTG and fits our kits. They are marked 11 degree, but they are twice as steep as the Brownells 11 degree cutter. Results would likely be best with jacketed bullets. Add an 11 to 18 degree chamfer…
Includes the 11 degree forcing cone cutter, rod, t-handle and bushing where needed. Add a chamfer plug gauge if you so desire. If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
Includes the 5 degree forcing cone cutter, rod, t-handle and bushing where needed. Add a chamfer plug gauge if you so desire. If you want a 90 degree cutter add that as a separate item here and indicate the diameter you need.
No products in the cart.