6.5mm
Showing all 35 results
-
6.5 / 270 WSM (.297) Match
$8.00Neck: .297 | Freebore: .173 | Lead Angle: 1.5º | Pilot: Bushing
-
6.5 / 270 WSM (.296) Match
$8.00Neck: .296 | Freebore: .188 | Lead Angle: 1.5º | Pilot: Bushing
-
256 Newton
$8.00 -
6.5 / 300 Weatherby
$8.00 -
264 LBC-AR (Grendel)
$42.00Pilot Floating
Grendel variation popular in semi-autos.
-
6.5 X 52 Carcano
$42.00 -
6.5 X 54 MS
$42.00 -
6.5 Japanese Arisaka
$42.00 -
6.5 X 55
$42.00 -
6.5 x 57 Mauser (CIP)
$8.00Pilot Floating
-
6.5 Remington Magnum
$42.00 -
6.5-284 Winchester
$42.00 -
6.5-284 Shehane
$42.00Pilot Floating
Match chamber for 6.5/284 Winchester
-
6.5-284 Norma
$42.00 -
6.5-06
$8.00This cartridge was taken to SAAMI by A-Square, sometimes abbreviated A2.
A-Square and Weatherby both chambered for it.
-
6.5 X 65 RWS
$8.00Pilot Solid
-
6.5-280 Ackley
$8.00More case capacity than the 6.5-06 Ackley
-
6.5 / 300 WSM
$42.006.5-300 and 6.5-270 WSM are interchangeable and use the same gauges.
-
26 Nosler Magnum
$42.00 -
6.5-300 Remington Ultra Magnum (RUM)
$42.00Also known as 6.5 UltraCat
-
6.5 STW (Shooting Times Western)
$42.00 -
6.5 / 300 Weatherby, Bore Rider Throat
$8.00Same are standard SAAMI version except for the bore rider throat, that keeps the bullet aligned to the bore better than standard Free Bore.
-
260 Cheetah
$42.00Uses 22 Cheetah, MkI gauges
-
6.5×47 Lapua Ackley Improved
$42.00Pilot Floating
-
6.5 X 55, Zero Freebore
$42.00Zero Freebore (minimal throat) Separate throating reamer needed.
Standard 6.5×55 Sweed otherwise.
-
6.5 Weatherby RPM
$8.00
The 6.5 WBY RPM is based on a lengthened version of the existing 284 Winchester. This cartridge has a rebated rim, making it compatible with standard 30-06 bolt faces and reloading equipment. However, the large body diameter, low body taper, and 35-degree shoulder mean that case capacity is greatly increased, leading to higher velocities, roughly 250 to 300 FPS faster than the 6.5/284 Winchester. -
7mm x 6.5 Weatherby RPM
$8.00The 7mm x 6.5 WBY RPM is based on a lengthened version of the existing 284 Winchester. This cartridge has a rebated rim, making it compatible with standard 30-06 bolt faces and reloading equipment. However, the large body diameter, low body taper, and 35-degree shoulder mean that case capacity is greatly increased, leading to higher velocities, roughly 200 to 300 FPS faster than the 284 Winchester. -
6.5 X 65R (Rimmed) RWS
$8.00 -
Lazzeroni, 6.71 Blackbird
$8.00 -
Lazzeroni, 6.71 Phantom
$8.00 -
AR-10 Extension Gauges, Creedmoor
$15.00These Gauges permit the checking of a barrel extension and barrel headspace without the need for a BCG or even a bolt. This set for AR-10 chambered in 6.5mm, 6mm, or 22 Creedmoor. As headspace for all three is identical.
-
Sale!
300 Belted Magnum Gauges
$32.95Description for the product.
Works with belted magnums with a .535″ diameter belt.
257 Wby, 264 Win., 6.5 Rem. Mag., 270 Wby., 275 H&H, 7mm Rem. Mag.,
7mm Wby., 7×61, 300 H&H, 300 Win. Mag., 30-338 Win., 300 Wby., 308 Norma,
8mm Rem. Mag., 338 Win. Mag., 340 Wby., 350 Rem. Mag., 358 Norma,
375 H&H, 400 H&H, 416 Rem. Mag., 416 Taylor, 458 Winchester, 458 Lott.
-
Sale!
6.5 Creedmoor, Forster Headspace Gauges
$32.95Headspace Gauges: For Sale
-
6.5mm Barrel Stainless Blank, 25″ 1-9
$189.956.5mm round barrel blank, 25″ x 1.06″ 416 stainless, 1:9 twist. This premium process barrel blank is button rifled, thermo stress relieved, precision air gauged to .0002″, trimmed and stamped with caliber and twist rate at breech end. Bore .257 Groove .266
We stock these blanks primarily to make Savage pre-fit barrels.
If you have us make this into a Savage barrel the end price will be the same as those listed for finished barrels. Blanks will always finish 1″ short than full length. -
6.5mm Barrel Chromoly (blue steel) Blank, 27″ 1-9
$199.956.5mm round barrel blank, 27″ x 1.20″ CM, 1:9 twist. This premium process barrel blank is button rifled, thermo stress relieved, precision air gauged to .0002″.
We stock these blanks primarily to make Savage pre-fit barrels.
If you have us make this into a Savage barrel the end price will be the same as those listed for finished barrels. Blanks will always finish 1″ short than full length.
