Bedding Supplies
- You cannot add "Jarrow's Inletting Black" to the cart because the product is out of stock.
Showing all 16 results
-
Bedding Pillars, Rem 700
$24.95Remington 700 adjustable pillars. Buy stand alone or use to refill the Gunsmith’s pillar bedding kit.
-
Forster – Trigger Guard Screw Sets
$7.49These simple tools allow you to keep the barreled action properly aligned in the stock during the inletting process. Without them it is very difficult to get a tight inlet.
- 98 Mauser
- Springfield 03, 03-A3 and Krag actions
- Remington 700, 721, 722
- Savage 110
- Winchester 70
- Sako
-
Forster Inletting Guide Screws (Stock Making)
$8.95These simple tools allow you to keep the barreled action properly aligned in the stock during the inletting process. Without them it is very difficult to get a tight inlet.
- 98 Mauser
- Springfield 03, 03-A3 and Krag actions
- Enfield 1914, 1917 and SMLE
- CZ 550 or 7.7 Jap Arisaka
- Remington 700, 721, 722
- Winchester 70 or 54
- Sako
-
Sale!
Forster Stock Makers Hand Screws (Stock Making)
$19.95These simple tools allow you to keep the barreled action properly aligned in the stock during final fitting.
Recommended by stockmakers, these Forster Stockmakers Hand Screws are used in the final accurate fitting of the stock to the action. These screws are precision made and hardened to make repeated trial fittings. Set of two.
To save time and to avoid damaged guard screws or a ruined stock, don’t attempt to inlet a stock without the proper stockmakers hand screws.
- 98 Mauser
- Remington 700, 721, 722
- Winchester 70 or 54
- Enfield P-14 or P-17
- Springfield or Krag
- Sako: Except, Model 75
- Ruger 77
- 7.7 Jap Arisaka
- 6.5 Jap
-
Jarrow’s Inletting Black
$14.85JERROW’S INLETTING BLACK The standard among stock makers since 1963! Does not dry out or soak into the wood. Leaves a good clear mark, yet cleans up easily. A small amount goes a long way. Positively the best products on the market for precision hand fitting of gunstocks, knife handles, cabinet furniture; all precision inletting. Inlay / fit parts to wood with ease.
-
Jarrow’s Inletting Gold
$19.95JERROW’S INLETTING GOLD
Inletting Gold is for those very dark woods and ebony forends that Inletting Black just won’t work on. Also works well on fiberglass and composite stocks. The standard among stock makers since 1963! Does not dry out or soak into the wood. Leaves a good clear mark, yet cleans up easily. A small amount goes a long way. Positively the best products on the market for precision hand fitting of gunstocks, knife handles, cabinet furniture; all precision inletting. Inlay / fit parts to wood with ease.
-
Mays Tools Stock Stick
$24.95A matte contrasting transfer material for inletting any part into a stock. Simply apply a thin coat to the part that you wish to inlet.Seat into stock recess tap with rawhide or similar mallet. Remove part and scrape away contact area you wish to remove from the stock. Used like other inletting marking systems to quickly and easily identify contact areas between the metal and stock. In an easy to use convenient applicator. Makes a perfect inletting job easy!
-
Sale!
Pillar Bedding Gunsmith Kit, Howa 1500 or Weatherby Vanguard
$49.95Aluminum pillars machined to mate between the action and the trigger guard will eliminate any possible compression. In a sense what you are doing is putting the brunt of the load on rock solid pillars, then attaching your stock to these pillars. The single most important quality pillar bedded rifles must have is that all of its components are at rest, whether the trigger guard screws are loose or tight, I.E. stress free bedding.
This easy to use kit allows the user to adjust the pillars to match the stock. You can assemble everything for bedding and know it is aligned for error proof bedding jobs.
Complete instructions included with the pillars and tools.
-
Pillar Bedding Gunsmith Kit, Winchester 70
$49.95Aluminum pillars machined to mate between the action and the trigger guard will eliminate any possible compression. In a sense what you are doing is putting the brunt of the load on rock solid pillars, then attaching your stock to these pillars. The single most important quality pillar bedded rifles must have is that all of its components are at rest, whether the trigger guard screws are loose or tight, I.E. stress free bedding.
This easy to use kit allows the user to adjust the pillars to match the stock. You can assemble everything for bedding and know it is aligned for error proof bedding jobs.
Complete instructions included with the pillars and tools.
-
Remington 700 Pillar Bedding Gunsmith Kit
$49.95Remington 700 Gunsmith’s pillar bedding kit comes with a set of adjustable pillars and installation tools for a perfect job every time. Full instructions included. refill pillar kits available separately. Just add your favorite bedding compound.
-
Swivel Stud & Swivel Set, custom ball design
$18.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. Included is a set of GroveTec locking sling swivels (1″ loops) Price here is for one pair of these custom swivel studs and one pair of swivel loops.
These are 3/4″ long wood screw style studs.
-
Swivel Studs, custom ball design
$9.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. They come in the standard blue finish and can be color case hardened for a more custom finish. Price here is for one pair of these custom swivel studs.
These are 3/4″ wood screw style and will fit standard QD sling swivels.
-
Swivel Studs, custom ball design (BULK)
$58.954D is now offering Sling Swivel Studs with a Ball head in stead of the common Dome. Providing a custom touch to your gun. They come in the standard blue finish and can be color case hardened for a more custom finish. Price here is for 24 of these custom swivel studs in a bulk package.
These are 3/4″ wood screw style and will fit standard QD sling swivels.
-
Swivel Studs, custom ball design, Intallation Tool
$21.95The premium choice for installing our custom ball swivel studs. Constructed of heat-treated carbon steel, this tool will not damage stock finish. Hex base designed to fit any standard drill chuck or 1/4-inch nut driver.
(Stud not included)